|
MODEL
|
JWX-10
|
| Acceptable
materials |
Modeling wax, plastic,
wood, epoxy composites |
| X,
Y, and Z operation strokes |
Rotary
axis unit uninstalled |
5-1/2 (X) X 4-1/8 (Y) X
4-1/8 (Z) in.
[140 (X) x 105 (Y) x 105 (Z) mm] |
| Rotary
axis unit installed |
5-1/2 (X) X 2-3/4 (Y) X
2-3/8 (Z) in.
[140 (X) X 70.9 (Y) X 60 (Z) mm] |
| Maximum
angle of rotation |
± 18 x 105° (
± 5000 rotations) |
| Distance
from spindle tip to work plate |
Using
work plate large |
Maximum 4-15/16 in. (126mm) |
| Using
work plate small |
Maximum 1-5/8 in. (40.5 mm) |
| Work
plate size Cutting area |
Work
plate large |
5-1/2 (W) X 4-1/8 (D) in.
[140 (W) x 105 (D) mm] |
| Work
plate small |
2-9/16 (W) X 2-9/16 (D) in.
[65 (W) x 65 (D) mm] |
| Dirnensions
of workpieces installable on the rotary axis unit |
Diameter : Maximum 85 mm
(3-3/8 in.)
Length :5 to 50 mm (1/4 to 1-15/16 in.)
Internal circle :15 to 23mm (9/16 to 7/8 in.) |
| Loadable
workpiece weight |
Using
rotary axis unit |
0.5 Kg (1.1 lb) (Maximum
workpiece moment of inertia6x10-4 kgm2) |
| Using
work plate large |
8.8 lb (4.0 Kg) |
| Using
work plate small |
1.5 lb (0.7 Kg) |
| XYZ-axis
motor |
Stepping motor |
| Feed
rate |
XYaxis : 0.0039 to 1.9
in./s (0.1 to 50 mm/sec.)
Z-axis : 0.0039 to 1.1 in./s (0.1 to 30 mm/sec.)
A-axis :0.02 to 11.79rpm |
Software
resolution
|
0.00039 in./step (0.01
mm/step) |
Mechanical
resolution
|
XYZ-axis :
0.002 mm/step (0.0001 mm/step)
A-axis : 0.0225 deg. |
| Clamping
method |
Specialized ring-cutting
tool |
| Rotary-axis
tilt angle |
0 deg. to 90 deg. (in
increments of 15 deg.) |
| Spindle
motor |
DC brushless motor, Maximum
100W |
| Spindle
rotation |
6000 to 20000 rpm |
| Tool
chuck |
Cutter holder (4.36 mm) and
collet |
| Interface |
USB connector, sensor
connector, rotary axis unit connector, expansion connector |
| Power
supply |
Voltage
and frequency |
AC1 00 to 240 ± 10%, 50/60
Hz |
| Required
power capacity |
2.1 A |
| Power
consumption |
Approx. 210W |
| Acoustic
noise level |
No-load
operation |
60 dB (A) or less
(According to lS07779) |
| Standby |
40 dB (A) or less
(According to lS07779) |
| Dimensions |
17-3/8 (W) X 20-3/8 (D) X
21-7/8 (H) in. [440 (W) X 517 (D) X 554 (H) mm] |
| Weight |
88.2 lb (40 Kg) |
| Operation
temperature |
41 to 104°F (5 to 40°C) |
| Operation
humidity |
35 to 80% (no condensation) |
| Accessories |
Power cord, collet,
cutter, sensor cable, chucking knob, work plate (large), mounting screws
for the large work plate, hexagonal wrenches, hexagonal screw drivers,
spanners, Roland Software Package CD-ROM, MODELA Player4 CD-ROM, user’s
manual, Roland Software Package installation and setup guide, MODELA
Player4 installation and setup guide |
Jewelry
Milling Machine & Engraver Roland's new JWX-10 was designed from the
ground up as a jewelry wax milling machine for the jewelry manufacturer or
custom retailer. Includes 4-axis CAM software, user manuals, tools, wax and
comprehensive jewelry milling tutorials
