B4100 - Bench
Top Programmable Digital Multimeter
- 5-1/2 Digit multimeter with selectable count resolutions up to 200,000
- True RMS and measures frequency
- Selectable Count Resolutions: 2K, 20K, 200K
- Auto-ranging
- Trend plot display
- RS-232 interface standard and optional GPIB interface
- Min/Max/Avg, Relative error and comparison functions
- May be used on line voltages from 85V to 250V without any internal changes.
- Software included
- Seven setups may be stored and recalled in memory
MSRP $551 Specifications
Our Price $468 
B845 - 4
1/2 digit, 20,000 count Bench Top Digital Multimeter
- 4-1/2 digit LCD display with polarity indicator
- 0.05% DC voltage accuracy
- 10µV AC & DC voltage resolution
- 10nA current resolution
- 10mW Resistance resolution
- 10mW Resistance resolution
- Measures current to 10 Amps
- 200µA AC/DC Current Range
MSRP $276 Specifications
Our Price $234
B940 - 3
3/4 Digit 4000 Count True RMS Bench Top DMM with RS232
- True RMS AC volts and amps measurements
- Capacitance and Frequency measurements
- Capacitance and Frequency measurements
- Capacitance and Frequency measurements
- Delay hold mode
- AC Line or Battery Operated
- RS-232 Interface with software
- Portable or Bench with Pop-up Stand
- Storage Compartment
MSRP $168 Specifications
Our Price $143
6800 - 80,000
Count Digital Multimeter
- 80,000 count Dual Display
- Basic DC accuracy is 0.05%
- Pulse output with frequency selection from 0.5Hz to 5KHz with duty cycles from 1% to 99%
- Measures frequency, ms Pulse width and duty cycle
- AC and AC+DC TRUE RMS measurements.
- Hi and Lo limit testing
- dBm measurement using 20 reference Impedances
- Min/Max/AVG
- Peak hold and Relative mode
- RS232 port
- CE and Category II 1000V and Cat III 600V safety standards
- Built in 10 hour timer
MSRP $194 Specifications
Our Price $165
6500 - 50,000
Count Multimeter
- 50,000 count and 50 segment bar graph backlit display
- Basic DC accuracy is ±0.03%
- Basic DC accuracy is ±0.03%
- dBm measurement with 4W to 1200W reference resistances
- AC and (AC+DC) TRUE RMS measurement
- Measures frequency, Duty cycle and Capacitance
- Cat III 1000V
- Max/Min and Relative measurements
- Auto power off and backlit display
MSRP $ 173 Specifications
Our Price $147
304 - 3
1/2 Digit 1000A AC/DC Mini Clamp-On Meter
- Measures AC/DC current to 1000A
- Manual ranging
- Measures Volts, Amps and Ohms
- 1.37" Jaw opening for cramped wiring locations
- Overload protection with indicator
- Data hold, Fused input
- Meets IEC-1010 Category III 600V safety standards
MSRP $158 Specifications
Our Price $134
305 - 3
3/4 Digit True RMS 1000amp AC/DC Clamp-On Meter
- Measures AC/DC current to 1000A
- True RMS AC Measurements
- Auto/Manual ranging
- Frequency counter
- 40 segment analog bar graph
- 2-1/4" Jaw opening
- Meets IEC-1010 Category III 600V Safety Standards
MRSP $200 Specifications
Our Price $170
A480B - 300A
Analog Clamp-On Meter
- Temperature measurement
- Meter Lock Switch freezes measured reading for closer examination at safe location
- For use in plant maintenance, HVAC, electrical installation, motor repair and similar applications
MSRP $50 Specifications
Our Price $43
30C - Loop
Calibrator
- 24 volt internal loop supply
- Auto Step and Auto ramp modes.
No need for external mA meter. - Simultaneous mA and % read out for quick, easy interpretation of reading
- 1µA resolution for mA source, simulate and measure
- 25% step button for quick linearity tests
- Large 4 ½ digit 20,000 count LCD display
- Encoder dial for easy one handed operation
MSRP $423 Specifications
Our Price $360
