Protek Test and Measurement Equipment Z9218 - High Accuracy, Wide Range LCR Meter with LCD Readout  

Search our Site: sitemap

  • 0.02% Basic accuracy
  • Wide measurement Ranges for Capacitors, Resistors and Inductors
  • Menus and parameters are displayed on an easy to read 320x 240 Graphics LCD with backlight
  • Measurement Rates to 12 times per second
  • 500 Test Frequencies from 12Hz to 100KHz
  • Open and short-circuit compensation for accurate zeroing
  • Binning and Pass/Fail operation
  • Measurement averaging from 1 to 255
  • Optional GPIB and handler interface
  • LCD displays measured values, Q/D, Absolute D and %D

MSRP: $1750   Our Price $1487   

Specification
Measurements
Measured Components L(Inductance),C(Capacitance), R(Resistance)
Measurement Circuit configurations Series and Parallel
Resistance
Measured Parameter R+Q
Measurement Ranges R: 10µW to 100MW
Q: 0.0001 to 9,999
Inductance
Measured Parameter L+Q
Measurement Range L: 0.01µH to 99,999 H
Q: 0.0001 to 9,999
Capacitance
Measured Parameters C+D and C+R
Measurement Range C: 0.00001pF to 99,999µF
D: 0.0001 to 9,999
R: 0.0001W to 9,999KW
Display
Display Type 320x 240 Graphics LCD W/Backlight
Display Value 5 digit LCR and a 4 digit Q/D measurement
Parameters Displayed Measured values, absolute D and %D
Test Environment
Test Frequencies 500 test frequencies from 12Hz to 100KHz
Test Voltage 5mV to 1.275V in 5mV increments
Test Voltage Accuracy ±(5% + 5mV) (1 + 001 x F2)
Measurement rates Slow: 1 Meas/sec
Medium: 5 Meas/sec
Fast: 12 Meas/sec
Measurement Delay from 1ms to 99,999ms
Ranging Auto or Manual.
DC Bias Internal: 2V, External: 0 to 60V
Triggering Continuous or Triggered
Zeroing Correction Open and short circuit
Averaging 1 to 255 Avgs
Measurement Accuracy
Basic Accuracy ± >0.02% at 23°C ±5°C (73°F ±9°F)
(See user manual for all accuracy conditions)
Remote Operation GPIB and Handler (Optional)
General Specifications
AC Voltage input 120 or 220 Volts
Frequency 50/60 Hz
Power Consumption 20Watts (Max)
Operating Temperature 0 to 50°C (32 to 122°F) @ relative humidity < 85%
Size 5.5" (H) x 15" (W) x 18" (D)
Weight 17.6 lbs
Accessories Manual, Line Cord, Kelvin leads with bag, GPIB Handler (Optional)

Mid-Atlantic Training is an authorized distributor of Protek products. 
Back to Protek Special Purpose Tester Page Home | Catalog Request | E-Mail View Cart | Check Out

Mid-Atlantic Training - 800-776-8093  - 143 William St, South River NJ 08882